With such an accessory there will be no problems where to get the keys and a mobile phone during a morning run or bike ride in the park.
You will need:
- A cut of dense bielastic knitwear;
- Zipper 14 cm;
- Decorative elastic tape;
- Velcro tape (Velcro) for fastener;
- Needle and thread for sewing
DIY Yoga Bag
Step 1
Determine the length of the belt: waist circumference plus 15 cm for an overlap.
Step 2
Cut out a belt detail 30 cm wide (15 cm in finished form) with 1 cm cut allowances.
Step 3
Mark the line of the middle of the belt. Put the zipper on the upper section of the belt, pin it.
Step 4
Unscrew the zipper on the wrong side and sew down close to the cloves.
Step 5
Pin the zipper to the opposite long section of the belt and stitch it.
Sew a bag of maxi-format do it yourself
Step 6
Chip or sweep the belt over long sections and grind.
Step 7
Turn the belt to the front side so that the seam with zipper is exactly in the middle. Round short slices and chop.
Step 8
Iron the belt.
Step 9
Fold the elastic tape in half and surround it with a belt around the entire perimeter - stitch it with a narrow zigzag stitch.
Step 10
Sew on the clasp.
DIY Charging Case
Instead of Velcro tape, you can use buttons or the most common buttons.
Source and photo: craftsy.com
