Share
Pin
Tweet
Send
Share
Send
A bright quilted bag with comfortable leather handles will appeal not only to little girls. You can also sew such a bag for yourself, replacing the fabric with a children's print on more adult materials.
YOU WILL NEED
Madapolam fabric 0.30 m wide 110 cm; lining fabric 0.25 m wide 140 cm; artificial leather 0.10 m wide 140 cm; ironing pad interlining X 50 (with
marked lines for quilting) 0.40 m wide 90 cm; Decovil I non-woven flap measuring 25 x 10 cm; 1 metal zipper 25 cm long; 0.80 m plastic hose with a diameter of 1 cm; 2 pompons with a diameter of 3-4 cm; twill tape 0.25 m wide 2 cm; braid 0.35 m wide 5 mm; glue stick (Pritt, Tesa).
Recommended fabrics: lightweight, shaped cotton fabrics.
PAPER PATTERN
Reshoot the pattern of the side of the bag. To do this, fold the silk paper in half and place it on the part of the pattern, aligning the fold of the paper with the dotted line. Detail of a paper pattern cut and lay out.
Allowances: Cut out all the details according to the indicated dimensions, allowances 1 cm wide are already taken into account in the dimensions and on the details of the paper pattern.
CUT
Made from Madapolam fabric:
Side part of a bag with a fold 2x
a) 2 parts of the bag (front / back side) 22.5 cm long and 27 cm wide;
b) the bottom of the bag is 27 cm long and 10 cm wide.
Faux Leather:
c) 2 handles 49 cm long and 6 cm wide;
d) 2 edgings 52 cm long and 3 cm wide, including allowances.
From lining fabric: side parts of the bag, as well as parts a and b.
Gasket: a gasket with marked lines for quilting to iron from the wrong side to the details of the bag. Duplicate the bottom with Decovil I non-woven fabric (25 x 8 cm), do not duplicate 1 cm wide allowances with a gasket.
SEWING
■ Stitch the bag details along the diagonal lines marked on the gasket into a 3 cm cage. Stitch the bag bottom to the lower sections of the front and back parts of the bag (allowance width 1 cm). Stitch the bottom along the stitching seams close to the seams.
■ Iron allowances along the upper cuts of the front and back parts of the bag on the wrong side, 1.5 cm wide. Pin the zipper under the ironed edges so that the teeth of the zipper protrude. Press the zipper close to the teeth.
■ Fold each edging in half along the wrong side inwards. Pip the edging to the outer slices of the side part of the bag, aligning the open sections of the edging with the edges of the allowances of the side part, lay the ends of the edging one on the other in the middle of the lower (wider) section. Stitch edging at a distance of 5 mm from the bend. Stitch the side parts of the bag to the front and back parts of the bag and to the bottom (allowance width 1 cm), securing the edging.
■ Allow all the cuts of each handle to be unscrewed to the wrong side, 1 cm wide, and glued. Fold the handle to a width of 2 cm (wrong side inwards). Sew longitudinal edges to the edge. Cut the hose into 2 equal parts, cut the hose into the handles, while leaving the ends of the handles protruding beyond the ends of the hose by the same length.Pin the ends of each handle to the front / back side of the bag at a distance of 7 cm from the zipper and at a distance of 5 cm from the seams for attaching the side parts, stitch along the perimeter of the square (2 x 2 cm).
■ Stitch the lining parts, while ironing the upper sections of the lining parts before sewing the side parts 1.5 cm wide on the wrong side. Put the lining in the bag on the wrong side and sew on the zipper braids.
■ Cut a 12 cm length from the braid and tie a zipper on the slider. Tie the remaining tape on the handle on the front of the bag. Tie a bow-tie with a bow. Wrap the ends of the braid around the middle of the bow and tie it again. Fasten pompons on the braid.
Attention! FUTTER translated from German - "lining".
Photo: Jan Schmidel.
The material was prepared by Elena Karpova.
Share
Pin
Tweet
Send
Share
Send
